Optimize Productivity with Master Bond Adhesives
Products are 100% reactive and contain no solvents or diluents. High temperature resistant systems and erosion preventative/repair compounds optimize productivity. Downtime is reduced, safety enhanced and efficiency improved.
Room temperature curing systems have been developed for both internal and external surfaces. Technologically advanced formulations meet stringent standards and guard against premature deterioration of valuable equipment/structures. This has resulted in lower capital expenditures. Specific grades offer resistance to temperature fluctuations, high pressure, impact and sliding abrasion. Sprayable/hand applied compounds prolong maintenance free periods and in many cases eliminate the need for welding.
Adhesives for Downstream Applications
From pitting to stress corrosion cracking to caustic embrittlement to mechanical failures, oil refinery engineers are faced with a multitude of costly challenges. Proper monitoring/control procedures and utilization of high performance Master Bond epoxy, fluorosilicone, polyurethane, polysulfide repair/coating systems can make a significant impact in alleviating corrosion damage in downstream applications. These products can withstand immersion in many aggressive chemicals and have excellent adhesion to composite, metal surfaces such as carbon steel, low alloy steel, stainless steel, copper, nickel titanium. Key considerations in selecting the proper material are severity of environmental exposure, surface preparation required, geometry of the part, thickness needed, recoatability and aesthetics.
两个组件，环境温度固化系统具有出色的物理性质。beplay官网骗人吗热稳定。抗压强度高。具有非凡的抵抗燃料，醇和有机溶剂。承受1000小时85°C / 85％RH。服务温度范围为-60°F至+ 400°F。中等粘度。良好的电气绝缘体。
Cures rapidly at moderate elevated temperatures. Superior resistance to moisture. Two part epoxy has long pot life at ambient temperatures. High bond strength properties. Reliable electrical insulator. Serviceable from -60°F to +450°F. Withstands aggressive chemical exposure. Tg 160-165°C. Shore D hardnes >80.
Acetoxy type fluorosilicone for bonding, sealing, coating. Enhanced resistance to fuels, oils, solvents, water, greases. Paste viscosity. Withstands thermal cycling. Serviceable up to +450°F. No mix system.